Specifications

Chapter 4 Configuration ASMi-52L Installation and Operation Manual
4-28 Additional Tasks
If you press <Q>, ASMi-52L aborts the download process and displays
Download failure. Press Esc to continue. message in addition
to the previous display.
During the software installation, the TST indicator blinks.
2. Send the *.img file to ASMi-52L using the XMODEM protocol of your terminal
application.
Once the downloading is complete, ASMi-52L decompresses the release
file, displaying the following message:
Final process download. Reset device after 5 seconds
After the decompression, ASMi-52L is automatically reset. This causes the
new software to be loaded into the modem's RAM.
Displaying the Software Version
You can display the information on the software revision of the local or remote
modem. The information includes a description of the active program, which is
currently being used by ASMi-52L, and also details on the passive software kept for
the backup purposes.

To display the software version:
1. From the SW Files menu, (File Utilities menu > File System > SW files), select
Local SW Files to display software revision of the local ASMi-52L, or select
Remote SW Files to display software revision of the remote device.
The Local or Remote Software Version screen appears (see Figure 4-33).
SW files
Software active version: 1.00A05
Software active partition: 0
Code size: 683027
Date: 17-7-3
Software backup version: 0.00n00
Software backup partition: 1
Code size: 0
Date: 0-0-0
Boot version: 1.20
Boot mng version: 6.00
Press any key to continue...
ESC-prev.menu; !-main menu; &-exit
Figure 4-33. Local Software Version Screen
Note