Specifications

Overview 5-1
Chapter 5
Configuring a Typical
Application
5.1 Overview
This chapter provides detailed instructions for setting up two ASMi-52L modems in
a typical application.
Configuration of ASMi-52L is performed via menu-driven embedded software,
using a standard ASCII terminal or a PC running a terminal emulation application
connected to the rear panel CONTROL port. Alternatively, ASMi-52L can be
managed from a Telnet host connected to the 10/100BASE-T port on the rear
panel. Read Chapter 4 to familiarize yourself with operation from a terminal.
Application
Two ASMi-52L modems operating opposite each other. One in the central office,
the second the customer premises equipment. User traffic is SHDSL.
CO CPE
RouterRouter
ASMi-52L
Receive Clock
123.456.78.91
ASCII
Terminal
ASMi-52L
Internal Clock
123.456.78.90
Figure 5-1. Typical ASMi-52L Application
Guidelines for Configuring ASMi-52L Units
Each ASMi-52L unit must be configured individually. This typical application has
the following configuration steps:
1. Setting the system: Setting the clock mode and the device Host IP address
2. Setting the line interface: Setting the Wire mode (2W or 4W)