Specifications

Chapter 3 Operation ASMi-52 Installation and Operation Manual
3-4 Default Settings
Table 3-4. Default Settings (Cont.)
Parameter Default Value
Telnet allowed Access allowed
WEB allowed Access allowed
Bootp state OFF
DTS IP address 0.0.0.0
DTS IP mask 0.0.0.0
LAN operation mode Transparent
Encapsulation CRC No
Bridging Mode Access only
Aging Timeout 10
Autonegotiation Enable
Max AutoNeg Capability 100BASE_T-full duplex mode
Control port rate 9600 bps
Data 8
Parity None
Interface DCE
CTS =RTS
DSR ON
Port control mode Terminal
User name –
Password 1234
Pop alarm OFF
Security timeout 10 min
Call Out Mode None
Number of retries 1
Wait for connect 30 sec
Dial mode Tone
Alternate number mode Disable
Primary number –
Alternate number –