Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-8 Configuring ASMi-52 System Parameters
ASMi-52
Inventory
1
Index 1001
Description RAD-local ASMi-52_M shdsl modem
Vendor type
Contained in 0
Class 3
Rel pos 0
Name shdsl modem
HW ver 0.00
SW ver 1.00E54
->>
>
ESC-prev.menu; !-main menu; &-exit; @-scroll; ?-help
Figure 4-7. Inventory Screen
4.5 Configuring ASMi-52 System Parameters
This section describes the procedures for configuring system parameters of
ASMi-52.

To access the Configuration menu:
• From the Main menu, select Configuration.
The Configuration menu appears (see Figure 4-8).
ASMi-52
Configuration >
1. System configuration >
2. Physical ports configuration >
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-8. Configuration Menu
The ASMi-52 management software allows you to perform the following:
• Configuring master clock
• Enabling or disabling low speed operation
• Defining management parameters (IP parameters, system information etc)
• Configuring 10/100Base-T port
• Defining control port parameters
• Resetting ASMi-52 to the defaults
• Performing the overall reset of the device or resetting its SHDSL interface.