Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-12 Configuring ASMi-52 System Parameters
4. Press <Esc> to return to the Management menu (see Figure 4-11).
5. From the Management menu, select Save to save your changes.
ASMi-52
Host IP
1. Host IP address (0.0.0.0)
2. Host IP mask (255.255.255.0)
3. Host default gateway (0.0.0.0)
4. Read community (public)
5. Write community (public)
6. Trap community (public)
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-13. Host IP Menu
Configuring the Network Managers
Define or modify the network management stations to which the SNMP agent of
ASMi-52 will send traps. Up to ten managers can be defined. Entering the IP
address and corresponding subnet mask defines each management station.

To configure the network managers:
1. Display the Manager List menu. (Path: Main menu > Configuration > System
Configuration > Management > Manager List)
The Manager List menu appears (see Figure 4-14).
2. From the Manager List menu, type a number corresponding to network
management station that you intent to define or modify, and enter its new IP
address.
3. Type a number corresponding to a subnet mask of the already defined network
management station, and enter a new value.
4. Repeat step 2 and step 3 to define additional management stations.
5. Press <Esc> to return to the Management menu (see Figure 4-11).
6. From the Management menu, select Save to save your changes.