Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-18 Configuring ASMi-52 System Parameters
ASMi-52
Data Rate (2304 Kbps)
1. 64 Kbps 12. 768 Kbps 23. 1472 Kbps
2. 128 Kbps 13. 832 Kbps 24. 1536 Kbps
3. 192 Kbps 14. 896 Kbps 25. 1600 Kbps
4. 256 Kbps 15. 960 Kbps 26. 1664 Kbps
5. 320 Kbps 16. 1024 Kbps 27. 1728 Kbps
6. 384 Kbps 17. 1088 Kbps 28. 1792 Kbps
7. 448 Kbps 18. 1152 Kbps 29. 1856 Kbps
8. 512 Kbps 19. 1216 Kbps 30. 1920 Kbps
9. 576 Kbps 20. 1280 Kbps 31. 1984 Kbps
10. 640 Kbps 21. 1344 Kbps 32. 2048 Kbps
11. 704 Kbps 22. 1408 Kbps 33. 2304 Kbps
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-21. LAN Rate Menu (2-WireVersion)
Configuring Autonegotiation
ASMi-52 autonegotiation allows you to operate at the fastest data rate available.
With autonegotiation enabled, the ASMi-52 unit automatically determines between
itself and the DTE the fastest data rate and duplex mode that they can operate.
With autonegotiation disabled, the LAN interface of ASMi-52 operates at the speed
and duplex mode that is configured by the Max AutoNeg capability.

To set the autonegotiation:
1. From the LAN Configuration menu, select Autonegotiation.
Toggle between Enable and Disable.
2. If the autonegotiation is enabled, choose Max AutoNeg Capability from the
LAN Configuration menu.
The Set Capability menu appears.
3. Select the desired LAN operation mode by choosing one of the following:
 10BaseT half duplex
 10BaseT full duplex
 100BaseT half duplex
 100BaseT full duplex.
4. If the autonegotiation is disabled, choose Default Type from the LAN
Configuration menu.
The Set Default menu appears.
5. Select the desired LAN operation mode by choosing one of the following:
 10BaseT half duplex