Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-20 Configuring ASMi-52 System Parameters
3. Select Save to save the changes.
ASMi-52
Rate (9600 kbps)
1. 9600 kbps
2. 19200 kbps
3. 38400 kbps
4. 57600 kbps
5. 115200 kbps
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-23. Control Port Rate Menu
Selecting the Control Port Interface

To select the control port interface:
1. From the Control Port menu, select Interface to choose the control port
interface: DCE (direct connection to the terminal via a straight cable) or DTE
(terminal connection via modem or data link).
The display is refreshed and the new value appears.
2. Select Save to save the changes.
Selecting the CTS State

To select the CTS state:
1. From the Control Port menu, select CTS to choose the CTS state: ON
(constantly ON) or =RTS (follows the RTS line).
The display is refreshed and a new value appears.
2. Select Save to save the changes.
Selecting the DSR State

To select the DSR state:
1. From the Control Port menu, select DSR to choose the DSR state: ON
(constantly ON) or DTR (follows the DTR line).
The display is refreshed and a new value appears.
2. Select Save to save the changes.
Changing the Terminal Parameters
The Port Control menu allows you to do the following:
• Setting port mode (terminal, dial out or SLIP)
• Managing user name and password
• Enabling or disabling pop-up alarms
• Defining security timeout
• Configuring dial-out parameters.