Specifications

ASMi-52 Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
Displaying SHDSL Statistics 6-9
Table 6-2. ASMi-52 Events (Cont.)
Terminal Message Description
GS OUT OF SYNC ABORT SHDSL framer out of sync
GS LOSS OF CARRIER DETECT SHDSL carrier loss
GS SQ ERROR DETECT SHDSL signal quality value is more than 22.7 dB
GS CRC ERROR DETECT More than three SHDSL CRC errors were detected during last second
REP SEGD ERROR DETECT SEGD error from repeater: sync fail on another part of the span
TRAINING MODE STACK CPE Training state timeout is exceeded (3 min)
DEVICE PRIMARY CALL FAIL Primary number dial attempt has failed
DEVICE DIAL CALL FAIL Dial out call cycle has failed
6.2 Displaying SHDSL Statistics
ASMi-52 has capabilities for collection of the SHDSL performance statistics. The
statistics data is collected for the current 15-minute interval or current day. In
addition ASMi-52 displays a statistics report for the last 96 intervals or the last
seven days, elapsed since the last modem power-up.
Displaying the Current SHDSL Statistics
SHDSL performance statistics for the current 15-minute interval and for the
current 24-hour interval.

To display the current SHDSL statistics:
1. Follow the path: Main menu > Monitoring > Physical Ports Monitoring > Port
Statistics.
The Physical Port Statistics menu appears (see Figure 6-8).
ASMi-52
Physical Port Statistics
1. SHDSL local port performances ...
2. SHDSL remote port performances ...
3. E1 local port performances ...
4. E1 remote port performances ......
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 6-8. Physical Port Statistics
2. From the Physical Port Statistics, select:
 SHDSL Local Port Performances to display the local unit SHDSL statistics
 SHDSL Remote Port Performances to display the remote unit SHDSL
statistics.
The SHDSL Statistics menu appears (see Figure 6-9).