User`s manual

RADview FCD-IP User’s Manual Chapter 6 Configuring FCD-IP for a Typical Application
Configuring the LAN Interface 6-5
Mapping E1Timeslots

To configure TS parameters:
1. Select LINK1.
2. Switch to Edit View: Click the Edit View button on the toolbar
.
3. Select Configuration >Physical Parameters > TS Assign…
or
click the shortcut key on the toolbar
.
The TS Assignment dialog box appears (Figure 6-6).
Figure 6-6. TS Assignment
4. Configure the first eight timeslots as follows:
 TS1, TS2, TS3 and TS4 – FIX SUB Voice
 TS5, TS6, TS7 and TS8 – DATA LINK 1.
5. Click <Set>.
6.4 Configuring the LAN Interface
Configuring the LAN interface includes the following:
• Enabling the LAN
• Configuring the LAN IP Address
• Configuring Default Gateway Settings
Enabling the LAN

To configure LAN Host Parameters:
1. Select the Ethernet LAN.
2. Switch to Edit View: Click the Edit View button on the toolbar
.
3. Select Configuration > Interface Info…
The Interface Information dialog box appears.