User`s manual

RADview FCD-IP User’s Manual Chapter 2 System Management
Setting Bridging Parameters 2-3
Table 2-1. System Information Parameters (Cont.)
Parameter Possible Values / Remarks
System Up Time Length of time since last power-up of device.
Aging (Min) IP aging time for the station.
Enable Broadcast Control Enables blocking or forwarding broadcast frames.
Block: blocks broadcast frames.
Forward: forwards broadcast frames.
Block Link Propagation: blocks broadcast frames to the links, transmitting to the
LAN.
Number of Interfaces Number of interfaces this device contains.
2.3 Setting Bridging Parameters
RADview enables you to add and remove addresses from the static portion of the
LAN table.

To add/remove addresses to the Static Table:
• Select Configuration > Bridging > Static Forwarding….
The Static Forwarding Table appears (Figure 2-3).
Figure 2-3. Static Forwarding Table