User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-10 OSPF
2.5 OSPF
RADview allows you to configure OSPF and view OSPF information.
Configuring OSPF

To enable OSPF:
1. Select Configuration > OSPF > Parameters….
The OSPF Parameters dialog box appears.
Figure 2-10. OSPF Parameters (Enable)
2. In the Admin Status field, select Enable.
3. Enter the Router ID.
4. Enable or disable Redistribute Routes.
5. Click <Set> to implement the changes.
The following confirmation message appears:
This operation will cause Restart of the device /n Connection with Agent
will be lost.”
6. Click <OK>.