User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-22 Configuring SNMP
2.9 Polling the Agent
RADview allows you to poll the FCD-IP device.

To poll the agent:
• Select Configuration > Poll Agent
or
click the shortcut key on the toolbar
.
The system polls the agent immediately.
2.10 Configuring SNMP
RADview enables you to view and modify SNMP settings; enabling you to specify
management stations that can receive FCD-IP traps. In the FCD-IP Manager List,
you can enter up to ten IP addresses of the relevant management stations.

To view/specify management station IP addresses to which to send traps:
1. Select Options > Manager List….
The Manager List dialog box appears (Figure 2-23).
Figure 2-23. Manager List