User`s manual

Chapter 3 Port Management RADview FCD-IP User’s Manual
3-12 Configuring Physical Parameters
Table 3-8. Async Link Parameters (Cont.)
Parameter Possible Values / Remarks
Local Number
Maximum 40 characters.
Valid characters are: 0..9, P, T, W , ', @
Number of rings before
answer
1..2
..255
[Add Modem…]
Click <Add Modem…> to open the Add Modem dialog box (
Figure 3-7).
Enter the desired parameters and click <Set>.
[Remove Modem] Remove a modem by selecting a modem from the Modem Name drop-down list
and clicking <Remove Modem>.

To add a new modem to the modems list:
1. In the Async Link Parameters dialog box, click <Add Modem...>.
The Add New Modem dialog box appears.
2. Configure the desired parameters.
3. Click <Set>.
Figure 3-7. Add New Modem Dialog Box
Table 3-9. Add New Modem Parameters
Parameter Possible Values / Remarks
Name Maximum 50 characters
Setting String Maximum 80 characters in two rows

To remove a modem from the modems list:
1. In the Async Link Parameters dialog box, select a modem from the Modem
Name drop-down list.
2. Click <Remove Modem>.
3. The system confirms the removal of the modem:
“Removing the selected modem.”