User`s manual

RADview FCD-IP User’s Manual Chapter 3 Port Management
Configuring Physical Parameters 3-21
TS Letter Codes
The connection cells use letter codes to describe the type of the connected time
slots.
D Data
V Voice
Port Name Color Codes
Green All of the port's connectable TS connections are
connected.
Gray None of the port's connectable TSs are being used.
Yellow
Some of the ports have TS connections. This is valid for
the MAIN or SUB ports only.
Selecting a Port Cell

To select a cell:
• Click on the desired cell.
A selected cell is outlined with a blue border
.
Creating a TS Connection
New TS connections are created only on gray cells (cells with connectable TSs).

To create a new TS connection:
1. Click an empty gray cell.
2. Click <Voice/Data>.
Disconnecting TS Connections
You can disconnect individual TS connections or all TS connections in the selected
port.

To disconnect an individual TS connection:
1. Click on a cell representing a TS connection (yellow).
2. Click <Disconnect>.
The gray color indicates that the cell's ports have no TS connection but
their TSs are connectable. If the cell becomes blue, TS connection is
impossible between the two corresponding ports.
Resetting All TS Connections

To reset all TS connections:
• In the TS Assignment dialog box, click <Reset All>.