User`s manual

Chapter 3 Port Management RADview FCD-IP User’s Manual
3-24 Configuring Physical Parameters
Figure 3-17. SHDSL Parameters
Table 3-15. SHDSL Parameters
Parameter Possible Values / Remarks
Interface LINK 1
Type SHDSL
Transmission Mode
Annex A, Annex B
Power Specral Density
(PSD) Mask
Symmetric, Asymmetric
Asymmetric PSD Rate
(only when
PSD=Asymmetric)
R1, R2
Selected rate depends on transmission mode specified in Annex A or B of G.991.2:
• Annex A
R1 = 776 or 784 kbps
R2 = 1544 or 1552 kbps
• Annex B:
R1 = 2312 kbps
R2 = 2056 kbps