User`s manual

Chapter 3 Port Management RADview FCD-IP User’s Manual
3-26 Configuring Physical Parameters
Table 3-16. SHDSL Status Parameters
Parameter Possible Values / Remarks
Actual Rate (Kbps) Contains the actual line rate in this HDSL2/SHDSL span.
192…4608
Loop Attenuation (dB) Current loop attenuation for this endpoint as reported in a Network or Customer Side
Performance Status message.
-127…128
SNR Margin (dB) Current SNR margin for this endpoint as reported in a Status Response/SNR message.
-127…128
Configuring Voice Interface Physical Parameters
This section describes how to view and configure voice interface (FXS, FXO and
E&M) parameters.
Voice interface configuration can be performed in both Agent and Edit Views.

To configure voice parameters:
1. Select a voice port.
2. Select Configuration > Physical Parameters…
The Voice Parameters dialog box appears.
Figure 3-19. Voice Parameters Dialog Box
Table 3-17. Voice Parameters
Parameter Possible Values / Remarks
Port
VOICE 1, VOICE 2, VOICE 3, VOICE 4
Interface Type
FXS, FXO, E&M 4 W
, E&M 2 W
Note