User`s manual

RADview FCD-IP User’s Manual Chapter 5 Performance
Displaying E1/T1 Statistics 5-3
Table 5-1. Testing Parameters – E1/T1
Parameter Possible Values / Remarks
Interface The selected port.
Link1, Link2, Link3, SUB1/Link2, SUB 2, SUB 3,
Interface Type The interface type of the selected port.
E1/T1
Current Test The currently running test.
New Test Remote Digital Loopback (T1 only), Remote Analog Loopback, Local Analog
Loopback
[Stop Test] Click <Stop Test> to stop a currently running test.
[Set] To run a different test, ensure that no test is currently running (click Stop Test). Select the
test to be run from the New Test list box and click <Set>.
5.4 Displaying E1/T1 Statistics
The following types of statistics are available for E1/T1 links:
• Packets Data Statistics
• Packets Graph
• Physical Layer Statistics
Packets Data Statistics

To display link statistics:
1. Select a Link or Channel.
2. Select Statistics >Packets Data Table…
The Link Statistics dialog box appears (Figure 5-3).
Figure 5-3. Link Statistics