User`s manual

Chapter 5 Performance RADview FCD-IP User’s Manual
5-4 Displaying E1/T1 Statistics
Table 5-2. Link Statistic Parameters
Parameter Possible Values / Remarks
Interface The selected interface.
Packets
Rx Unicast Frames The number of subnetwork Unicast packets received froma higher layer protocol.
Rx Multicast Frames The number of subnetwork Multicast packets received from a higher layer protocol.
Tx Unicast Frames The number of subnetwork Unicast packets transmitted to a higher layer protocol.
Tx Multicast Frames The number of subnetwork Multicast packets transmitted to a higher layer protocol.
Masked frames The number of masked frames received on this physical link.
Octets
Rx Bytes (k) The number of octets received on this interface including framing characters.
Tx Bytes (k) The number of octets transmitted on this interface including framing characters.
Error Frames
RxError Frames Number of errored packets received on this physical link.
TxError Frames Number of errored packets transmitted by this physical link.
Packets Graph Statistics

To display link packet statistics in a graph:
1. Select a Link or Channel.
2. Select Statistics >Packets Graph > Packets…
The Link Packets graph appears (Figure 5-4).
Figure 5-4. Link Packets