Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
FCD-E1LC Ver. 1.0 Technical Support 6-29
Speed auto
No cdp enable
Please note that if you start the Cisco unit from with default parameters, you
have to "open" the Ethernet interface:
Router(config)#inter fast 0/0
Router(config-if)#no shutdown
Router(config-if)#
Router(config-if)#end
6.7 Technical Support
Technical support for this product can be obtained from the local distributor from
whom it was purchased.
For further information, please contact the RAD distributor nearest you or one of
RAD's offices worldwide. This information can be found at www.rad.com
(offices
– About RAD > Worldwide Offices; distributors – Where to Buy > End Users).