Specifications

FCD-E1LC Ver. 1.0 Introduction D-1
Appendix D
Supervision Terminal
Commands
D.1 Introduction
This appendix provides a detailed description of the FCD-E1LC supervision
language. The information appearing in this appendix assumes that the user is
familiar with the FCD-E1LC system and with its configuration parameters. If
necessary, review
Appendix C for a description of the FCD-E1LC operating
environment,
Chapter 3 for a general description of the FCD-E1LC supervision
language syntax, and
Chapter 1 for a functional description of the FCD-E1LC.
The commands described in this section are listed in alphabetical order (see the
Command Set Index table in Chapter 3 for a complete list). The description
includes the command format, usage, and options.
The following notational conventions are used:
[ ] square brackets indicate optional entry/parameter.
{ } accolades indicate required entry/parameter.
‘ ‘ single quotes delimit user entry.
<Enter> indicates the pressing of the Enter key.
<SP> indicates the pressing of the spacebar.
CC indicates the data channel number, 1 or 2.
The screens appearing in this appendix are given for illustration purposes only,
and must not be construed as providing typical parameter values. Parameter
values must be selected in accordance with the specific requirements of each
particular application. If necessary, contact RAD Technical Support Department.
Note