Specifications

Appendix D Supervision Terminal Commands Installation and Operation Manual
D-4 Commands FCD-E1LC Ver. 1.0
Use
1. To set the date, type:
DATE<Enter>
FCD-E1LC displays the date entry form:
DAY = 06
MONTH = 02
YEAR = 2004
4. Change by pressing <F> to increase and <B> to decrease the displayed
values. When done, press <Enter> to move to the next field.
5. To end, press <Enter> after the YEAR field.
DEF AGENT
Purpose
Display and modify the current SNMP agent parameters.
This command is used to configure the parameters needed to enable SNMP and
Telnet management.
Refer to
Appendix B and Appendix C for background information.
Syntax
DEF AGENT
Use
1. To define the SNMP agent parameters, type:
DEF AGENT<Enter>
You will see the current agent parameters under the header OLD AGENT
PARAMETERS, followed by the entry row for the first parameter,
TELNET_APATHY_TIME.
2. Select the desired value by pressing <F> or <B>, then press <Enter> to
display the second row. Continue until all the parameters are defined, and
then press
<Enter> to continue.
3. Once the next parameter is displayed, type in the new value, and then press
<Enter> to end.
A typical display, as seen after all the parameters are selected, is shown below: