Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-5
Telnet_APATHY_TIME
10 MIN
IP_ADDRESS IS : = 192.114.029.209
READ COMMUNITY IS : = public
WRITE COMMUNITY IS : = private
TRAP COMMUNITY IS : = public
Table D-1 lists the agent parameters, along with their range of values and
instructions on how to modify them.
Table D-1. SNMP Agent Parameters
Parameter Function Values
TELNET_APATHY_TIME
Selects the time, in minutes, after which a
Telnet connection will be automatically
terminated if no incoming activity is
detected
The available values are 10MIN,
15MIN, and 20MIN.
Default: 10MIN
IP_ADDRESS
Type in the IP address assigned to the
FCD-E1LC SNMP agent
Use the dotted-quad format (four
groups of digits in the range of 0
through 255, separated by periods).
Default: 999.999.999.999
SNMP READ COMMUNITY
Type in the name of the SNMP community
that has read-only authorization (the
FCD-E1LC SNMP agent will accept only
getRequest and getNextRequest
commands from management stations
using that community)
Up to eight alphanumeric characters.
Default: public
SNMP WRITE
COMMUNITY
Type in the name of the SNMP community
that has read-write authorization (the
FCD-E1LC SNMP agent will also accept
setRequest commands from management
stations using that community)
Up to eight alphanumeric characters.
Default: private
TRAP COMMUNITY
Type in the name of the SNMP community
to which the FCD-E1LC SNMP agent will
send traps
Up to eight alphanumeric characters
Default: public
DEF ALM MASK
Purpose
Display and modify the alarm masks (masked alarms are not reported).
The alarm masks are used to disable the reporting of alarms by unused ports, and
stop the generation of alarms during maintenance.