Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-23
DEF MANAGER LIST
Purpose
Define or modify the network management stations to which the SNMP agent of
this FCD-E1LC system will send traps. Up to five managers can be defined.
Syntax
DEF MANAGER LIST
Use
1. To define a management station, type:
DEF MANAGER LIST<Enter>
You will see the current list of managers, in the following format:
OLD MANAGERS LIST PARAMETERS
MANAGER 1 IP ADDRESS IS : 192.168.238.001
MANAGER 1 SUBNET MASK IS : 255.255.255.240
MANAGER 2 IP ADDRESS IS : 192.168.200.253
MANAGER 2 SUBNET MASK IS : 255.255.255.000
MANAGER 3 IP ADDRESS IS : 192.168.238.203
MANAGER 3 SUBNET MASK IS : 255.255.255.240
MANAGER 4 IP ADDRESS IS : 192.114.029.209
MANAGER 4 SUBNET MASK IS : 255.255.255.000
MANAGER 5 IP ADDRESS IS : 192.168.238.196
MANAGER 5 SUBNET MASK IS : 255.255.255.240
After the current table, you will see the first row of the managers list data
form, which is used to define the IP address of the first management
station.
2. Type in the IP address of the desired management station. Use the dotted-quad
format (four groups of digits in the range of 0 through 255, separated by
periods).
3. After filling in the required address, press <Enter> to display the next row,
and then type in the subnet mask in the dotted-quad format. The mask
consists of four groups of digits in the range of 0 to 255, separated by
periods. The mask specified by these digits must consist of consecutive “1”s,
followed by consecutive “0”s.
A typical data form, as seen after both rows used to define the first
management station have been filled in, is shown below:
MANAGER 1 IP ADDRESS 172.165.68.221
MANAGER 1 SUBNET MASK 255.255.255.000
4. Repeat Step 3 to define the additional management stations (2 through 5).
5. After pressing <Enter> for the subnet mask of the fifth manager, you will see
the full updated list, and the command ends.