Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
FCD-E1LC Ver. 1.0 FCD-E1LC Enclosures 2-7
A. FCD-E1LC without Sublink
B. FCD-E1LC with Sublink
Figure 2-1. Typical FCD-E1LC Front Panels
Table 2-2. FCD-E1LC Front Panel Indicators
Indicator Function
PWR Indicator (green) Lights when the FCD-E1LC is powered
TST Indicator (yellow)
Lights when a test is active
ALM Indicator (red) Flashes to indicate that a major alarm condition is present in the system.
Lights to indicate that the most severe alarm condition present in the system is
a minor alarm
SYNC LOSS – MAIN LOC
Indicator (red)
Lights to indicate local loss of synchronization on the main link
SYNC LOSS – MAIN REM
Indicator (red)
Lights to indicate that a remote loss of synchronization indication has been
received by the main link interface
SYNC LOSS – SUB LOC
Indicator (red)
Lights to indicate local loss of synchronization on the sublink
SYNC LOSS – SUB REM
Indicator (red)
Lights to indicate a remote loss of synchronization indication has been received
by the sublink interface
FCD-E1LC Rear Panels
The components located on the FCD-E1LC rear panels depend on the ordered
interfaces.
Figure 2-2 shows several typical rear panels of FCD-E1LC units. Table 2-3 explains
the functions of the rear panel components.