Specifications

Installation and Operation Manual Chapter 4 Configuration
FCD-E1LC Ver. 1.0 FCD-E1LC Command Language 4-9
Command Purpose Options
CLR LOOP LOC ANA ML
CLR LOOP LOC ANA SL
CLR LOOP LOC DIG ML
CLR LOOP LOC DIG SL
CLR LOOP REM ANA ML
CLR LOOP REM ANA SL
CLR LOOP REM DIG ML
CLR LOOP REM DIG SL
CLR LOOP LOC CH 1
CLR LOOP LOC CH 2
CLR LOOP REM CH 1
CLR LOOP REM CH 2
CLR LOOP ML
CLR LOOP SL
CLR LOOP CH 1
CLR LOOP CH 2
CLR LOOP BERT ML
CLR LOOP INBAND ML
Clear user-initiated test or loopback.
DATE Set the date for the FCD-E1LC internal clock
DEF AGENT Define the FCD-E1LC SNMP agent configuration parameters
DEF ALM MASK Define the alarms to be masked (ignored)
DEF AR Define the alarm reporting method, and the alarm indications, for
each alarm level
DEF BERT ML Define the type of test sequence to be used for BER testing on the
main link
DEF CALL Define the dial-out parameters
DEF CH Configure the parameters of the data channel
DEF DNLOAD ML Define the main link inband management parameters
DEF DNLOAD SL Define the sublink inband management parameters
DEF MANAGER LIST Define or modify the network management stations to which the
SNMP agent of this FCD-E1LC unit will send traps
DEF ML Configure main link parameters
DEF NAME Define the logical name of the FCD-E1LC
DEF NODE Define the node number of the FCD-E1LC
DEF PROMPT Define the supervisory port prompt
DEF PWD Define a new password
DEF ROUTE Define the network management stations to be statically routed via
the supervisory port
DEF SL Configure sublink parameters
DEF SP Configure supervisory port parameters
DEF SYS Configure system parameters
DEF TERM Reset the terminal control codes to 0