Specifications

Chapter 5 Configuring FCD-E1LC for a Typical Application Installation and Operation Manual
5-4 Configuration Example FCD-E1LC Ver. 1.0
MANAGER 1 IP ADDRESS 192.114.029.201
MANAGER 1 SUBNET MASK 255.255.255.240
5. Type DEF AGENT to configure the SNMP agent parameters:
 The FCD-E1LC management IP address is 192.114.029.209
 Write community used by the RADview station: RAD
 The other parameters can be left at their factory defaults.
A typical display, as seen after the required parameters have been selected,
is shown below:
OLD AGENT PARAMETERS
IP_ADDRESS IS : = 0.0.0.0
READ COMMUNITY IS : = public
WRITE COMMUNITY IS : = private
TRAP COMMUNITY IS : = public
TELNET_APATHY_TIME
10 MIN
IP_ADDRESS IS : = 192.114.029.209
READ COMMUNITY IS : = public
WRITE COMMUNITY IS : = RAD
TRAP COMMUNITY IS : = public
6. Type DEF DNLOAD ML to configure the FCD-E1LC inband management
parameters for the main link:
 Management mode: Frame Relay
 Network management traffic carried in timeslot 30.
A typical display, as seen after the required parameters have been selected,
is shown below:
DNLOAD MODE
FRAME_RL
TS_NUM SPEED
30 64
Configure Main Link Parameters
Type DEF ML to define the required main link parameters:
 E1 link interface operating mode: LONG
 Framing mode: G.732N