User guide

8-1
8. Fluor-S MultiImager
Fig. 8-1. Fluor-S MultiImager.
Before you can begin acquiring images using the Fluor-S
®
MultiImager, the
imaging system must be properly installed and connected with the host
computer. See the Fluor-S hardware manual for installation, startup, and
operating instructions.
Note: Make sure that the temperature light on the Fluor-S is green before
attempting to capture an image. If you are using a PC, the Fluor-S should
be turned on and the initialization sequence completed before the host
computer is turned on. See the hardware manual for more details.