User guide

Fluor-S MultiImager
8-5
Custom Applications
If your application is not listed, if you want to use a user-installed filter, or if
you want to access High Sensitivity mode (see below), you can create and
save your own custom application.
From the application tree, select Custom, then Create. This will open a dialog
box in which you can name your application and select your settings.
Fig. 8-4. Creating a new custom application.
To select the filter (including user-defined), type of illumination, and camera
mode, click on the appropriate buttons and select from the pop-up lists.
Note: Under Illumination, there is a listing for a spare UV light source. This
selects the spare UV bulb in the Fluor-S. Select this light source if your
main UV bulb fails.
Enter a name for your application in the Name field. Click on OK to
implement your changes.
After you have created an application, you can select it from the application
tree by selecting Custom and the name you created. You can delete the
application by selecting Custom, Delete, and the name of the application.