User guide

9-1
9. Fluor-S MAX MultiImager
Fig. 9-1. Fluor-S MAX MultiImager.
Before you can begin acquiring images using the Fluor-S
®
MAX MultiImager,
the imaging system must be properly installed and connected with the host
computer. See the Fluor-S MAX hardware manual for installation, startup,
and operating instructions.
Note: Make sure that the temperature light on the Fluor-S MAX is green before
attempting to capture an image. If you are using a PC, the Fluor-S MAX
should be turned on and the initialization sequence completed before the
host computer is turned on. See the hardware manual for more details.