User guide

Quantity One User Guide
10-6
File Size of Images
Image File Size (below Select Resolution) shows the size of the scan file you
are about to create. If you do not have enough computer memory for the
specified file size, an error message will appear when you attempt to scan. If
this happens, select a lower resolution or decrease the size of the area to be
scanned. (Macintosh users can also increase the application memory
partition. See your Macintosh computer documentation for guidance.)
10.4 Acquire the Image
Once you have selected your scan area and resolution, you ready to acquire
an image.
Click on the Acquire button. There may be a short delay while the image laser
warms up; then the scanned image will begin to appear in the scanning
window, line by line.
To interrupt a scan, click on the Stop button. A message will ask you to
confirm the interrupt, and then you will be asked if you want to keep the
partial scan. This feature is useful if you overestimated the size of the area
you selected.
Note: If the image you are scanning has more than 10 saturated pixels, you will
receive a warning message.
Saving the Image
After the scan is complete, a message will appear asking you if you want to
keep the scan. If you select Yes, a separate window will pop up containing the
new image.
You can then save and analyze the image using the standard menu and
toolbar functions.