User guide

11-1

11. Molecular Imager FX

Fig. 11-1. Molecular Imager FX

Before you can begin acquiring images using the Molecular Imager

FX, the

instrument must be properly installed and connected with the host computer.

See the FX hardware manual for installation, startup, and operating

instructions.

Note: The FX should be turned on and the initialization sequence completed

before the host computer is turned on (except in the case of certain Power

Macintosh conﬁgurations). See the hardware manual for more details.

PC Only: A Note About SCSI Cards

The FX is connected to your computer by a Small Computer System Interface

(SCSI) cable. To use the FX, you must have a SCSI card installed in your PC. If