User guide

Quantity One User Guide
11-6
Note: Some applications require an external laser. If you choose one of these
without having an external laser attached, you will receive a warning.
To exit the tree without selecting, press the ESC key.
Your selection will be displayed below the Select button.
Sample Intensity
Many FX applications require that you select a sample intensity (High,
Medium, or Low) from the application tree. This is simply a rough estimate of
how much sample is visible in your gel or other object.
If you are unsure of the level of intensity of your sample, you can always
select a level, capture an image, then adjust the level and capture another
image.
For example, if you select Low Sample Intensity and the resulting image has
too many saturated pixels, you will receive a warning message. Simply
change the setting to Medium Sample Intensity and rescan. If you select High
Sample Intensity and the resulting image is too faint, select Medium or Low
and rescan.
Custom Applications
If your application is not listed, if you want to use user-installed filters, or if
you want to use an external laser, you can create and save your own custom
application.
From the application tree, select Custom, then Create. This will open a dialog
box in which you can name your application and select your settings.