User guide

Quantity One User Guide
14-16
Fig. 14-11. Band Attributes dialog box.
Click on any of the buttons in the Band Labels group to display that particular
attribute next to each defined band on your image.
14.5.a Summary of Band Attributes
Each band attribute is summarized below.
• None—No attribute is displayed.
• Band number—The sequential number of a band in lane, as counted
from the top of the lane.
• Relative front—The distance of a band from the top of a defined lane to
the bottom, divided by the total length of the lane. This distance can be
determined either by measuring a vertical line from the top of the lane to
bottom or (if the lane is curved) by measuring along the length of the
lane. Select Edit > Preferences to set the preferred measuring method.
Note: Note that Normalized Rf is derived from Relative Front; however,
Normalized Rf is calculated only for bands that have been modeled using
standards or band sets, and can change based on the modeling.