User guide

Quantity One User Guide
15-12
To save the standard values with the image, click on the Close button to close
the Standards form, then save the image. When you open the image again, the
standards will be available when you select Standards.
If you want to save these standards for use on other images, click on the
Archive button. The standards will be saved in an archive file separately from
the image.
To use a set of archived standards, open any image, then choose Standards
from the menu or toolbar and select the archived standards. They will be
imported into the image.
To delete a set of standards you have created, open them, then click on the
Delete button at the bottom of the form. A pop-up box will ask you to confirm
that you want to proceed with the deletion before completing the action. This
will delete the standards from both the image and the archive.
To modify a set of standards you have created, open them, make your
changes, then save the image and (if desired) archive the new standards.
Read-Only Standards
You can make your archived standards read-only (i.e., they cannot be deleted
from or modified in the archive using the methods described above; they can
still be deleted from or modified in the image).
Simply insert a tilde character (~) in front of the name of the standards, then
click on the Archive button. These standards will always be available under
that name in the list of standards.
All Bio-Rad standards are read-only.
Disabling/Deleting the Archive
If you do not want to have access to the archived standards (including
Bio-Rad standards), simply remove the ONEDPREFS.DBS database from the
FIXED.PRM folder on your hard drive. Under Windows, this folder is located
in the Bio-Rad/Program Files/The Discovery Series directory. On the
Macintosh, this file is located in The Discovery Series folder in the Preferences
folder in your System Folder.