User guide

Quantity One User Guide
5-2
appear active, but instead of capturing real images, the window will create
“dummy” images of manufactured data.
You do not need to be connected to an imaging device to open a simulated
acquisition window. This is useful for demonstration purposes or practice
scans.
To enter simulation mode, hold down the CTRL key and select the name of the
device from the File menu. The title of the acquisition window will indicate
that it is simulated.
Note: There is no simulated calibration for the GS-700 and GS-710 Imaging
Densitometers.
5.1 GS-700 Acquisition Window
To acquire images using the GS-700, go to the File menu and select GS-700....
The acquisition window for the densitometer will open, displaying a control
panel and a scanning window.