Specifications

FOM-40 Installation and Operation Manual Quick Start Guide
Installing FOM-40 3
Switch Description Values Default Setting
Baud Rate
[kbps]
1 2 3 4
56 OFF OFF OFF OFF
64 OFF OFF OFF ON 64
96 OFF OFF ON OFF
112 OFF OFF ON ON
128 OFF ON OFF OFF
192 OFF ON OFF ON
256 OFF ON ON OFF
384 OFF ON ON ON
512 ON OFF OFF OFF
768 ON OFF OFF ON
1024 ON OFF ON OFF
1536 ON OFF ON ON
1544 ON ON OFF OFF
2048 ON ON OFF ON
N/A ON ON ON OFF
BAUD RATE, SW5/1–4
Selects the baud rate
N/A ON ON ON ON
Connecting the Cables
Connecting the Line

To connect the fiber optic cables
1. Remove the protective caps from the connectors and store them in a safe
place for later use.
2. Connect the transmit fiber to the connector marked TX and the receive fiber to
the connector marked RX.
3. At the remote unit connect the transmit fiber to RX and the receive fiber to TX.
Connecting the DTE

To connect the DTE:
Connect the DTE cable to the appropriate FOM-40 rear panel connector.
Connecting the Power

To connect AC power to FOM-40:
1. Connect the power cable to the power connector on the FOM-40 rear panel.
2. Connect the power cable to the mains outlet.
The unit will be turned on automatically upon connection to the mains.

To connect DC power to FOM-40:
Refer to DC power supply connection supplement.