Specifications

Chapter 1 Introduction Installation and Operation Manual
1-6 Technical Specifications RICi-E3, RICi-T3 Ver. 1.0
PWR (green) On – RICi-E3, RICi-T3 is on
Off – RICi-E3, RICi-T3 is off
Front Panel
Indicators
TST (yellow) On – test is in progress
Off – no test is in progress
Blinking (red/yellow) – alarm detected while test in progress
ALM (red) On – alarm has been detected
Off – no alarm has been detected
Blinking (red/yellow) – alarm detected while test in progress
LOS (red) On – network LOS (Loss of Signal) detected
Off – network signal uninterrupted
LOS (yellow)
RICi-T3 only
On – Yellow alarm (RAI) has been detected
Off – no Yellow alarm has been detected
ETH LINK (green) Ethernet Link Integrity:
On – link is connected
Off – link is disconnected
Rear Panel
Indicators
LINK (green) Ethernet Link Integrity:
On – link is connected
Off – link is disconnected
ACT (yellow) Ethernet Activity:
Blinking – Frames are being received or sent
Off – No frames are being received or sent
Power
AC /DC Source 100 to 240 VAC or 48/60 VDC (40 to 72 VDC)
Consumption 8W
Physical
Height
43.7 mm (1.7 in)
Width
220 mm (8.6 in)
Depth
170 mm (6.7 in)
Weight
0.5 kg (1.1 lb)
Environment
Temperature RICi-E3, RICi-T3: 0 to 50°C (32 to 122°F)
RICi-E3/H RICi-T3/H: -22° to 70°C (-7.6° to 158°F)
Humidity Up to 90%, non-condensing