Specifications

Installation and Operation Manual Chapter 3 Operation
RICi-E3, RICi-T3 Ver. 1.0 Configuration Alternatives 3-7
4. To optimize the view of the system menus, do the following:
 Set the terminal emulator to VT100.
 If you are using HyperTerminal, set the terminal mode to the 132-column
mode.
5. Power up RICi-E3, RICi-T3.
When the unit has initialized and completed the self-test, a menu
appears displaying initialization and self-test results.
Logging In
 To log in:
1. Enter the default user name su for superuser.
2. Enter the default password 1234.
• It is recommended to change default passwords to prevent unauthorized
access to the unit.
• If you do not enter at least one character within 5 minutes, you will have to
log in again.
Selecting Options
 To select an option:
1. Type the number corresponding to the option and press <Enter>.
2. If you performed a change, Save appears as the last option in the menu.
3. Type the number corresponding to the Save option in the current menu, and
press <Enter> to save your change.
RICi-E3, RICi-T3 updates its database with the new value or displays a
new menu for the selected option.
4. If you press <ESC> to exit the menu without saving your changes, the
following message appears:
“Do you want to save changes (Y/N/C)?”
Type the appropriate letter, Yes, No, or Cancel.
When a menu option has only two values, typing the option number and pressing
<Enter> will toggle between the available values.
Note
Note