Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-E3, RICi-T3 Ver. 1.0 Configuring for Management 4-7
RICi-E3, RICi-T3
Configuration>System>Management>Manager List
1. Manager ID (1)
2. Manager IP ... (1.1.1.1)
3. Manager IP Mask ... (255.255.255.0)
4. Manager Trap Mask ... (Disable)
5. Save all
>
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-6. Manager List Menu, Add Mode
3. When in Add mode, do the following:
 Select Manager IP, and enter the IP address of the management station.
 Select Manager IP Mask, and enter the subnet mask of the management
station.
 Select Manager Trap Mask, and select Enable or Disable to mask or
unmask traps for the selected management station.
 Select Save all to save the network manager.
 Press <Esc> to return to the Edit mode.
 To edit the manager list:
1. In the Management List menu, move the cursor to the Manager IP cell by
pressing <Tab>. The selected cell is highlighted and the value displayed in the
“Change cell” field.
2. Press <1>, and then press <Enter> to enter a new IP address for the selected
network manager.
3. Move the cursor to the Manager IP Mask cell, and change or enter a new
subnet mask value as required.
4. Move the cursor to the Trap Mask field and toggle between Enable and
Disable to mask or unmask traps for the selected network manager.
 To remove a network manager:
1. From the Manager List, select the desired network manager.
2. Press <R> to remove the selected network manager.
 To remove all network managers:
• Press <X> to remove all network managers from the Manager list.