Specifications

Chapter 4 Configuration Installation and Operation Manual
4-16 Configuring for Operation RICi-E3, RICi-T3 Ver. 1.0
Configuring the MAC Table
Static MAC addresses are stored in the MAC table.
 To add a static MAC address:
1. From the Bridge menu, select Static MAC Table.
The Static MAC Table appears as illustrated in
Figure 4-13 .
RICi-E3, RICi-T3
Configuration>Applications>Bridge>Static MAC Table
| Address | Received Bridge Port |
+________________________________________________+
| 00–00–12–34–54–55 | E3 |
| 00–00–44–44–44–44 | ETH |
| 00–12–23–23–23–23 | ETH |
+________________________________________________+
ESC-prev menu; !-main menu; &-exit; ?-help
Figure 4-13. Static MAC Table
2. In the Static MAC Table, press <A> to add a static MAC address.
The Static MAC table switches to the Add mode as illustrated in
Figure 4-14 .
RICi-E3, RICi-T3
Configuration>Applications>Bridge>Static MAC Table
1. MAC Address ... (000000000000)
2. Receive Bridge Port > (UNDEFINED)
3. Save
>
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-14. Static MAC Table, Add Mode
3. In Add mode, perform the following:
 Select MAC Address, and enter a new MAC address.
 Select Receive Bridge Port, and choose a RICi-E3, RICi-T3 interface this
MAC address will be attached to.
 Select Save All to save the MAC address.
 Press <Esc> to return to the Static MAC table.
 To remove a static address from the table:
• From the Static MAC Table, select the desired MAC address, and then press
<R>.
The selected MAC address is deleted from the table.