Specifications

Chapter 5 Configuring a Typical Application Installation and Operation Manual
5-4 Configuring the Physical Ports RICi-E3, RICi-T3 Ver. 1.0
5.4 Configuring the Physical Ports
Configure the following physical ports:
• E3 or T3 port
• Ethernet port
Configuring the E3 Port
 To configure the E3 port parameters:
1. Navigate to the E3 menu:
Main Menu > Configuration > Physical Ports > E3
2. Configure the E3 parameter values as specified below:
 Administrative Status: Up
 Tx Clock: LBT
 Protocol: HLDC
3. Select Save.
Configuring the T3 Port
 To configure the T3 port parameters:
1. Navigate to the T3 menu:
Main Menu > Configuration > Physical Ports > T3
2. Configure the T3 parameters as specified below:
 Administrative Status: Up
 Framing: M23
 Tx Clock: LBT
 Line Build Out: 0 to 255 ft
 Protocol: HLDC
3. Select Save.