Specifications

Chapter B Boot Manager Installation and Operation Manual
B-2 Booting RICi-E3, RICi-T3 RICi-E3, RICi-T3 Ver. 1.0
RAD RICi-E3/T3 Boot Version 1.20 (Jan 25 2005)
Boot Manager Version 7.02 (Jan 25 2005)
0 - Exit Boot-Manager
1 - Dir
2 - Set active software copy
3 - Delete software copy
4 - Download an application by XMODEM
5 - Format flash
6 - Show basic hardware information
7 - Reset board
8 - System configuration.
9 - Download an application by TFTP
Press the ESC key to return to the main menu.
Select:
Figure B-1. Boot Manager Menu
From the Boot Manager menu, you can perform the following:
• Listing all files stored in the flash memory
• Exchanging the operating and backup files
• Deleting the operating file; the backup file becomes the operating file
• Downloading a new operating file (via XMODEM or TFTP); the previous
operating file is saved as the backup file
• Deleting all software and configuration files
• Displaying the basic hardware information (RAM, ROM size etc)
• Resetting the RICi-E3, RICi-T3 board
• Configuring the RICi-E3, RICi-T3 IP address, IP mask and default gateway for
the consecutive file download via TFTP.
If you choose to exchange or delete a file, you are prompted to confirm your
request.