Specifications

Chapter B Boot Manager Installation and Operation Manual
B-4 Transferring the Software and Configuration Files RICi-E3, RICi-T3 Ver. 1.0
Downloading Application Files via TFTP
 To download application file via TFTP:
1. From the Boot Manager menu, select System Configuration.
2. Configure the IP parameters of RICi-E3, RICi-T3 (IP address, IP mask and
default gateway). These parameters are valid only for the TFTP file transfer
via the Boot Manager.
3. Start a TFTP application.
4. Configure the TFTP communication parameters as follows:
 Connection timeout – more than 30 seconds to prevent an automatic
disconnection during the backup partition deletion (about 25 seconds).
 Block size – 512 bytes.
 UDP port – 69.
5. Select a local software release file to download.
6. Enter the RICi-E3, RICi-T3 IP address.
7. Start downloading.
RICi-E3, RICi-T3 automatically erases the backup partition (it takes about
25 seconds). Once the downloading is completed, RICi-E3, RICi-T3 saves the
new release as an active partition; the former active partition turns into
backup.