System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
Table 2-13. Managers Routing Parameters
Parameter Possible Values/Remarks
IP Addr IP Address of manager
IP Mask IP Address Mask
Next Hop IP Indicates IP address to which the frame will be sent when the Dest. Name IP is not in
the device subnet
Interface Cost
(Metric)
1..15
Resetting the Device

To reset the device:
• From the Configuration menu, select Reset.
The Megaplex is reset.
2.2 Megaplex Level Diagnostic Operations

To run diagnostic test on Bundles:
1. From the Diagnostics Menu, select Bundle Connection Test…
The Bundle Connection Test dialog box appears (Figure 2-25).
Figure 2-25. Bundle Connection Test Dialog Box – Step I
2. Select desired bundle and click <Test…>
The Bundle Connection Test dialog box appears (Figure 2-26).
3. Select type of test you want to run (from the New Test list) and click
<Start Test>.
Megaplex Level Diagnostic Operations 2-25