System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
Parameter Possible Values / Remarks
Description Brief description of the alarm
Severity Indication of the effect level of the alarm:
Event, Warning, Minor, Major, Critical
State Type of alarm:
Off - No alarms or events in port
Event - At least one alarm event (including state on, off events) since the last
Alarms>Clear operation
Major - At least one active major alarm since the last Alarms>Clear operation
Minor - At least one active minor alarm since the last Alarms>Clear operation
Mask/Invert Indicates mask/invert staus of alarm
Mask: No, No and Save, Yes, Yes and Save
Inverted: Yes, No
Counter Number of times that this alarm occurred since either Megaplex startup or the last time
the alarm list was cleared
[Save File…] Saves alarms list in a file. In the Save dialog box the default file name is output.alr. You
can change the filename.
[Clear] Clears all active alarms. Confirmation is not required.
Displaying Active Bundle Alarms

To display a list of active bundle alarms:
• From the Fault menu, select Alarms followed by Display and Bundles…
The Bundle Active Alarms List appears. From this dialog box you can
display all IP Bundle alarms or alarms for a specific bundle (selected from
table).
Figure 2-30. Bundle Active Alarms List

To display all IP Bundle Alarms:
• Click <All Bundles…>.
A dialog box appears listing all IP Bundle alarms.
Megaplex Level Fault Operations 2-29