System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
Figure 2-31. Alarms Severity & ACM Relay Dialog Box
The Alarms Severity dialog box displays a list of alarms, their types and a severity
level. The dialog box contains the following parameters:
Table 2-16. Alarms Severity & ACM Relay Parameters
Parameter Possible Values / Remarks
Code Identifier of the alarm
Description Brief description of the alarm
Default Status Type of alarm: Event, Minor, Major
Severity Indication of the effect level of the alarm: Event, Warning, Minor, Major, Critical.
ACM Slot ACM Slot
ACM Port ACM Port
Note
If Default Status is Event but Severity is not Event, a filter is required to obtain the
required severity.
Setting Alarm Attributes
Using the Attributes command, you can set a period of time for alarm filters
validity and the attributes for the selected Megaplex alarms. The defined attributes
pertain to specific alarm codes, slots and ports.

To view alarm attributes
• In the Fault menu, click Alarms followed by Configuration and Attributes…
Megaplex Level Fault Operations 2-31