System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
Table 2-37. Time Slots Parameters
Parameter Possible Values / Remarks
Port Destination port in the destination slot. Options depend on the available ports on the
installed IO card.
None, NA, external-1..external-12, Internal-1..Internal-13
Time Slot Destination time slot for the selected time slot in the current Megaplex. This parameter is
relevant if the destination slot contains an MTML card.
Assigned time slots are checked during sanity checks.
For T1 link - None, 1 to 24
For E1 link - None, 1 to 31
Direction NA, Tx, Rx, Both, BcastSrc, BcastDst
TS Type NC, Data, Voice, Mng
ML-IP CAS Parameters
CAS (Channel Associated Signaling) parameters can be displayed.

To display CAS parameters for an ML-IP internal port:
• Select an entry in the Time Slots Table (Figure 2-53), click <CAS>.
The CAS dialog box appears (Figure 2-49).
Figure 2-49. ML–IP CAS (Internal Port)
2-60 Agent Port Level Operations