System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
Table 2-40. Time Slots Parameters
Parameter Possible Values / Remarks
Slot Slot in which the selected card is inserted
IO-1 to IO-12
Port Number of the selected port
external-1, external-2 or internal-1
Card Type Type of the selected card
All MTML cards
TS Src Index number of the selected time slot
For T1 link: 1..24
For E1 link: 1..31
Slot Destination card slot in the current
MP-2100
None, IO-1..IO-12, Split
Port Destination port in the destination slot. Options depend on the available ports on the
installed IO card.
None, NA, external-1..external-12, Internal-1..Internal-13
Time Slot Destination time slot for the selected time slot in the current Megaplex. This parameter is
relevant if the destination slot contains an MTML card.
Assigned time slots are checked during sanity checks.
For T1 link - None, 1 to 24
For E1 link - None, 1 to 31
Direction NA, Tx, Rx, Both, BcastSrc, BcastDst
TS Type NC, Data, Voice, Mng
Split Time Slot
In MTML card ports, the time slots may be split into smaller parts so that different
bits are connected to different slots and/or ports. If a time slot is Split, you can
expand the table to view the connections of the time slot's bits.

To view the connections of a split time slot's bits:
• Click an entry whose slot is Split and click <Expand> or double-click the
TS Src or Slot column of an entry whose slot is Split.
The Time Slots Table displays eight additional rows (one for each bit)
directly under the selected time slot.

To return to the Time Slot Table's normal view:
• Click a Bit entry and click <Collapse> or double-click a Bit entry.
2-66 Agent Port Level Operations