System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
2.11 Displaying Port Statistics
You can view statistical information for the external-1 port of an MTML card.
RADview displays statistics in dialog boxes and graphs.
Setting the Polling Interval
RADview updates displayed statistical data by polling the Megaplex at set intervals.
The Polling Interval command allows you to set the number of seconds between
polls.

To set the polling interval:
• From the Statistics menu, select Polling Interval…
The Polling Interval dialog box appears.
Figure 2-58. Polling Interval Dialog Box
Table 2-44. Polling Interval Parameters
Parameter Possible Values / Remarks
Polling Interval
Number of seconds between polls
Applicable for FDL messages and Current Data dialog boxes and graphs
Polling Enable
√ enables polling when a Statistics dialog box is open
After each poll, RADview automatically updates the information in the dialog box.
If polling is disabled, RADview does not automatically update a Statistics dialog box.
Note: Polling is always enabled when a Statistics graph is open.
Displaying LAN Statistics
The LAN Statistics command allows you to view current statistics for ML-IP ports.

To display LAN Statistics:
1. Select an ML-IP port.
2. From the Statistics menu, select LAN Statistics...
The LAN Statistics dialog box appears.
Displaying Port Statistics 2-75