System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-7
Figure 1-5. Mux Information Dialog Box
Table 1-2. Mux Information Parameters
Parameter Possible Values / Remarks
Type The type of Megaplex
MP-2100, MP-2104
Master Clock
Type Main source for Megaplex timing
Internal
, Rx Clock, Adaptive
Note: Adaptive is available only when an ML-IP card exists in the hub
Slot The slot containing the card on which the master clock is located. This parameter is
applicable only when the master clock source type is Rx Clock.
Empty slots are not selectable.
IO-1..
IO-12
For MP-2104: IO-1
..IO-5.
Port The port through which the master clock signal is received by the Megaplex.
external-1
..external-12
For an HS-Q/M card, only external-1 is available
When Type is Adaptive: Bundle1..Bundle120
Note: To avoid future sanity check errors, select only existing bundles, or one that is
going to be created
Fallback Clock
Type Alternate source for the Megaplex timing, to be used in case the master clock fails
Internal
, Rx Clock, Adaptive
Note: Adaptive is available only when an ML-IP card exists in the hub